NASA’s off-again, on-again Mars digger nicknamed the mole is finally buried in the planet’s soil and will take readings beneath the surface next year.
If you’ve been following this Martian drama closely, you’ll know that the instrument, which came to the unforgiving dust world with NASA’s InSight lander, has been in a spot of bother for more than a year. The probe was designed to burrow at least three metres into the Martian soil to take the planet’s temperature.
Officially known as the Heat Flow and Physical Properties Package (HP3), the rod-like mole hammered itself about 35cm into the Red Planet after it was deployed in February 2019. It then got stuck in a type of soil NASA hadn’t anticipated, and later bounced out, ruining its progress. The experiment’s scientists decided to fix the problem by pushing the gizmo into the soil using a scoop attached to a robotic arm, allowing it to continue digging down.
Probe … Illustration of the InSight lander and its HP3 temperature sensor on the right … Credit: NASA/JPL-Caltech
Now, NASA has reported the mole is fully embedded under the surface of Mars, and it should be up and running as an instrument early next year. Ground control will use the scoop to push soil on top of the probe to provide more friction for it to drill down further. Here’s how NASA described the problem and the solution:
“I’m very glad we were able to recover from the unexpected ‘pop-out’ event we experienced and get the mole deeper than it’s ever been,” said Troy Hudson, an engineer at NASA’s Jet Propulsion Laboratory, who led the work to rescue the mole, on Friday.
“But we’re not quite done. We want to make sure there’s enough soil on top of the mole to enable it to dig on its own without any assistance from the arm.” ®